LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Speed Control) >> Cable >> Installation >> Installation-Except 4.7L

Installation-Except 4.7L

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install end of cable to speed control servo. Refer to SERVO  .
  2. Install cable into throttle body mounting bracket (snaps in).
  3. Install speed control cable connector at throttle body bellcrank pin (snaps on).
  4. Connect negative battery cable at battery.
  5. Before starting engine, operate accelerator pedal to check for any binding.
scientia non olet · About LEMON Manuals