Unlock Sequence
WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
The unlock sequence can be toggled using a DRB III(R) or by using the following procedure.
- Place the key in the ignition.
- Within 10 seconds, cycle the key from the OFF position to the ON position four times, ending in the ON position (Do not start the engine).
- Within 30 seconds, press the driver's door lock switch in the UNLOCK direction. A single chime will be heard to indicate the feature has been disabled.
This will toggle between Driver door first and Unlock all doors function.
To ENABLE this feature, repeat the above procedure.