2ND Seat Dome/Reading Lamp: Removal
WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Using a small flat blade, pry the center rearward edge of the dome/reading lamp lens downward from lamp (Fig 1 ).
- Allow the lens to hang down this will disengage the forward edge of the lamp from the headliner.
- Pull the forward edge of the lamp down and slide the lamp forward.
- Separate the lamp from the headliner.
- Disengage lamp wire connector from body wire harness.
- Separate lamp from vehicle (Fig 2 ).