LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Lamps & Lighting - Exterior) >> Tail Lamp Unit >> Installation

Tail Lamp Unit: Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install sockets in tail lamp.
  2. Position tail lamp at cargo box, engage retaining studs (Fig 1 ) and install screw.
    Fig 1: Positioning Tail Lamp At Cargo Box, Engage Retaining Studs
    G02656724Courtesy of DAIMLERCHRYSLER CORP.
  3. Close tailgate.
  4. Connect the negative battery cable.