LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Lamps & Lighting - Exterior) >> License Plate Lamp Unit >> Removal

License Plate Lamp Unit: Removal

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove license plate lamp bulb socket.
  3. From the underside of the bumper and using a small flat blade, push in retaining tab to release the lamp from the bumper.
  4. Separate lamp from bumper.
scientia non olet · About LEMON Manuals