Headlamp Unit: Installation
WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.
- Install bulb sockets for the front park/turn signal/side marker lamps.
- Engage the connector to the headlamp bulb.
- Position headlamp in inner fender panel and firmly push headlamp inward to lock into place.
- Install the bolts attaching headlamp to the panel.
- Connect the battery negative cable.