LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Lamps & Lighting - Exterior) >> Fog Lamp Unit >> Installation

Fog Lamp Unit: Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the fog lamp in the bumper.
  2. Install the bolts attaching the fog lamp to the bumper (Figure ).
  3. Connect the fog lamp harness connector.
  4. Check for proper operation and beam alignment (Refer to ADJUSTMENTS-FOG LAMP UNIT  ).
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals