LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Horn System) >> Horn >> Installation

Section 43 (Horn System): Horn: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the horn and mounting bracket unit onto the front of the left vertical member of the radiator support.
  2. Install and tighten the screw that secures the horn and mounting bracket unit to the radiator support. Tighten the screw to 10.7 N.m (95 in. lbs.).
  3. Reconnect the headlamp and dash wire harness connectors to the horn connector receptacles.
  4. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals