LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Horn System) >> Horn Relay >> Installation

Horn Relay: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. See the fuse and relay layout label affixed to the inside of the fuse access panel for the proper horn relay location.
  2. Position the horn relay in the proper receptacle in the Junction Block (JB).
  3. Align the horn relay terminals with the terminal cavities in the JB receptacle.
  4. Push in firmly on the horn relay until the terminals are fully seated.
  5. Install the fuse access panel.
  6. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals