LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Cooling - Removal & Installation) >> Radiator Fan-Electric >> Installation

Radiator Fan-Electric: Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install fan assembly onto the radiator. Tighten bolts 5 N.m (45 in. lbs.).
  2. Connect fan motor wire connector to harness connector.
  3. Connect battery negative cable.
  4. Start engine and check fan operation.
scientia non olet · About LEMON Manuals