Frame Contact Hoist
WARNING: This page is about a different car, the 2004 Dodge Dakota, 2003 Dodge Dakota, and 2002 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
Frame contact hoist must be equipped with proper adapters to support vehicle in correct locations. If using swiveling arm hoist, position lifting pads evenly on subframe rails. Hoist must be equipped with proper adapters so vehicle will be supported at marked points.
Vehicle may be raised on single or twin post swiveling arm type hoists. If using swiveling arm hoist, ensure lifting arms, pads or ramps are positioned evenly on frame rails, and adequate clearance is maintained for transfer case (4WD models) or skid plate. All hoists must be equipped with adapters to properly support vehicle. See Figure .