LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Starter System) >> Removal & Installation >> Starter Motor Relay >> Removal

Starter Motor Relay: Removal

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate negative battery cable.
  2. Remove cover from Power Distribution Center (PDC). See Figure .
  3. See fuse and relay layout label affixed to underside of PDC cover for starter relay identification and location.
  4. Remove starter relay from PDC.
scientia non olet · About LEMON Manuals