LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Parking Brake Shoes >> Removal

Parking Brake Shoes: Removal

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the tire and wheel assembly.
  3. Remove the disc brake caliper. See CALIPER .
  4. Remove the disc brake rotor. See ROTOR .
  5. Lockout the parking brake cable.
  6. Disengage the parking brake cable from behind the rotor assembly to allow easier disassembly of the parking brake shoes. See Fig 1.
  7. Remove the axle shaft. See appropriate DRIVE AXLES article in DRIVELINE/AXLES.
  8. Remove the parking brake shoes. See Fig 2 or Fig 3 .
Fig 1: Disengaging Parking Brake Cable
G00303262Courtesy of CHRYSLER CORP.
Fig 2: Removing & Installing Parking Brake Shoes (Dakota)
G00303263Courtesy of CHRYSLER CORP.
Fig 3: Removing & Installing Parking Brake Shoes (Durango)
G00303264Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals