LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Parking Brake Release Lever >> Installation

Parking Brake Release Lever: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the parking brake release lever to the instrument panel.
  2. Engage one of the parking brake release lever hinge tabs with one of the pivot pins on the instrument panel.
  3. Align the second parking brake release lever hinge tab over the second pivot on the instrument panel.
  4. Press firmly on the parking brake release handle over the second hinge tab until it snaps over the second pivot pin on the instrument panel.
  5. Reach under the driver side outboard end of the instrument panel to access and engage the parking brake release linkage rod end from the lever on the back of the parking brake release lever.
scientia non olet · About LEMON Manuals