LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Parking Brake Pedal Assembly >> Installation

Parking Brake Pedal Assembly: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install assembly on mounting studs.
  2. Install mounting bolt and nuts.
  3. Install mounting bolts and nuts.
  4. Install front parking brake cable. See PARKING BRAKE CABLES (FRONT) .
  5. Connect brake warning lamp switch.
  6. Install brake release rod to pedal assembly.
  7. Install left side kick panel.
scientia non olet · About LEMON Manuals