LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove brake lines from the master cylinder. See Fig 1.
  2. Remove mounting nuts from the master cylinder. See Fig 1.
  3. Remove master cylinder.
Fig 1: Removing & Installing Master Cylinder & Reservoir
G00264451Courtesy of CHRYSLER CORP.