LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Disc Brake Shoes >> Removal (Rear)

Removal (Rear)

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle.
  2. Remove the wheel and tire assemblies.
  3. Compress the caliper.
  4. Remove the caliper. See CALIPER .
  5. Remove the caliper by tilting the top up and off the caliper adapter.
    6. CAUTION: DO NOT allow brake hose to support caliper assembly.
  6. Support and hang the caliper.
  7. Remove the inboard brake pad from the caliper adapter. See Fig 1.
  8. Remove the outboard brake pad from the caliper adapter. See Fig 1.
Fig 1: Removing & Installing Rear Disc Brake Shoes
G00303260Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals