LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Caliper Adapter >> Installation

Caliper Adapter: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the caliper adapter to the steering knuckle.
  2. Install the caliper adapter and mounting bolts. See TORQUE SPECIFICATIONS .
  3. Install the disc brake caliper. See CALIPER .
  4. Install tire and wheel assembly. See TORQUE SPECIFICATIONS .
  5. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals