LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Brake Support Plate >> Removal (Disc Brakes)

Removal (Disc Brakes)

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove wheel and tire assembly.
  2. Remove the disc brake caliper. See CALIPER .
  3. Remove caliper adapter. See CALIPER ADAPTER .
  4. Remove the rotor. See ROTOR .
  5. Remove the axles shaft. See appropriate DRIVE AXLES article in DRIVELINE/AXLES.
  6. Remove the parking brake shoes. See PARKING BRAKE SHOES .
  7. Remove the parking brake cable from the brake lever.
  8. Remove the bolts attaching the support plate to the axle and remove the support plate.
scientia non olet · About LEMON Manuals