LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Brake Support Plate >> Installation (Disc Brakes)

Installation (Disc Brakes)

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install support plate on the axle flange. See TORQUE SPECIFICATIONS .
  2. Install the parking brake shoes. See PARKING BRAKE SHOES .
  3. Install parking brake cable in the brake lever.
  4. Install parking brake shoes. See PARKING BRAKE SHOES .
  5. Install the axle shaft. See appropriate DRIVE AXLES article in DRIVELINE/AXLES.
  6. Adjust brake shoes to drum with brake gauge. See PARKING BRAKE SHOES  under ADJUSTMENTS.
  7. Install the rotor. See ROTOR .
  8. Install the caliper adapter. See CALIPER ADAPTER .
  9. Install the caliper. See CALIPER .
  10. Install the wheel and tire assembly. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals