LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Brake Pedal >> Installation

Brake Pedal: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Replace bushings if worn or damaged.
  2. Lubricate pedal bushings and pivot pin with Mopar multi-mileage grease, Lubriplate, or a silicone grease.
  3. Install bushings in pedal and position pedal in support.
  4. Insert pivot pin through support and pedal bushings and install C-clip.
  5. Install stop lamp switch. See BRAKE LAMP SWITCH .
scientia non olet · About LEMON Manuals