LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Brake Lamp Switch >> Installation

Brake Lamp Switch: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press and hold brake pedal down.
  2. Align tab on new switch with notch in switch bracket. Then insert switch in bracket and turn it clockwise about 30° to lock into place.
  3. Connect harness wires to switch.
  4. Release brake pedal.
  5. Move the release lever on the switch to engage the switch plunger. See Figure. The switch is now adjusted and cannot be adjusted again.
scientia non olet · About LEMON Manuals