LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Bleeding Brake System >> Brake System Bleeding >> Pressure Bleeding

Pressure Bleeding

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Follow the manufacturer's instructions carefully when using pressure equipment. Do not exceed the tank manufacturer's pressure recommendations. Generally, a tank pressure of 15-20 psi is sufficient for bleeding. Fill the bleeder tank will recommended fluid and purge air from the tank from the tank lines before bleeding. Do not pressure bleed without a proper master cylinder adapter. The wrong adapter can lead to leakage, or drawing air back into the system. Use adapter provided with the equipment or Adapter (6921).

scientia non olet · About LEMON Manuals