Service Specifications

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

SPECIFICATIONS

Application

Specification

Compressor Type

Sanden SD-7H15

Compressor Belt Tension

⁽¹⁾

Refrigerant (R-134a) Capacity

32 ozs. (.95L)

Refrigerant Oil Capacity ⁽²⁾

A/C System

7.1 ozs. (.21L)

Accumulator

3.0 ozs. (.09L)

Compressor

⁽³⁾

Condenser

1.0 oz. (.03L)

Evaporator

2.0 ozs. (.06L)

System Operating Pressures ⁽⁴⁾

High Side

200-300 psi (14.1-21.1 kg/cm² )

Low Side

25-35 psi (1.8-2.5 kg/cm² )

⁽¹⁾	Dynamic tensioner automatically adjusts belt. Tension is okay if indicator is within marked limits on belt tensioner.

⁽²⁾	Use SP-15 PAG refrigerant oil.

⁽³⁾	Drain and measure oil from old compressor. Add equal amount to new compressor.

⁽⁴⁾	Measured at ambient air temperature of 80°F (27°C).