No Response From Pcm With A No-Start Condition: Notes

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For circuit identification and wiring diagram, see WIRING DIAGRAMS . If Powertrain Control Module (PCM) is replaced, PCM must be reprogrammed. See PROGRAMMING in REMOVAL & INSTALLATION - DAKOTA article. After each repair procedure has been completed, reconnect all components. Perform the following test to ensure system is functioning properly.

On 3.9L and 5.9L, perform POWERTRAIN VERIFICATION TEST VER-1 under VERIFICATION TESTS in SELF-DIAGNOSTICS - DAKOTA - 3.9L & 5.9L article.
On 4.7L, perform POWERTRAIN VERIFICATION TEST VER-1 under VERIFICATION TESTS in SELF-DIAGNOSTICS - DAKOTA - 4.7L article.