LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Controls - Self-Diagnostics - 3.9L & 5.9L) >> Diagnostic Tests >> DTC P0340: No Cam Reference Signal At Pcm >> Monitored & Set Conditions

Monitored & Set Conditions

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Camshaft Position (CMP) reference signal is monitored while engine is cranking or running. DTC will set when at least 5 seconds have elapsed with Crankshaft Position (CKP) sensor signals present and no signal from CMP sensor present.

scientia non olet · About LEMON Manuals