LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Controls - Self-Diagnostics - 3.9L & 5.9L) >> Diagnostic Tests >> DTC P0320: No Crank Reference Signal At Pcm >> Monitored & Set Conditions

Monitored & Set Conditions

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Crankshaft Position (CKP) sensor reference signal is monitored when ignition is on. DTC will set when no signal is received from CKP sensor during engine cranking and at least 3 Camshaft Position (CMP) sensor signals have occurred.

scientia non olet · About LEMON Manuals