LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Self Diagnostics - 4.7L) >> Self-Diagnostic System >> Clearing Diagnostic Trouble Codes >> Using Scan Tool

Using Scan Tool

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition off. Connect scan tool to Data Link Connector (DLC), located under left side of instrument panel. See Figure. Turn ignition on. Using screen prompts on scan tool, erase DTCs from Powertrain Control Module (PCM).

scientia non olet · About LEMON Manuals