LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Self Diagnostics - 4.7L) >> Programming >> Sentry Key Immobilizer Module >> Programming Unsuccessful

Programming Unsuccessful

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

If ignition key programming is unsuccessful, the DRBIII® scan tool will display one of the following messages.

Programming Not Attempted  - The DRBIII® scan tool attempts to read the programmed key status and there are no keys programmed into SKIM memory.

Programming Key Failed  - Possibly used key from wrong vehicle. SKIM is unable to program key due to one of the following.

Keys Already Learned, Programming Not Done  - SKIM transponder ID memory is full.

  1. Obtain ignition keys to be programmed from customer (8 keys maximum).
  2. Using the DRBIII® scan tool, erase all ignition keys by selecting MISCELLANEOUS and ERASE ALL CURRENT IGN. KEYS.
  3. Program all ignition keys.

Learned Key In Ignition  - Ignition key transponder ID is currently programmed in SKIM memory.

scientia non olet · About LEMON Manuals