LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Self Diagnostics - 4.7L) >> Diagnostic Tests >> DTC P0632: Odometer Not Programmed In Pcm >> Testing

DTC P0632: Odometer Not Programmed In Pcm: Testing

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition on, engine not running. With the DRBIII® scan tool, erase DTCs. Using the DRBIII® scan tool, program the mileage into the PCM. Start the engine. Allow the engine to reach normal operating temperature. With the DRBIII® scan tool, read DTCs. Does the DTC reset? If yes, replace and program the PCM. See PROGRAMMING . If no, the mileage has been successfully programmed into the PCM. Test is complete.
scientia non olet · About LEMON Manuals