LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Self Diagnostics - 4.7L) >> Diagnostic Tests >> DTC P0340: Camshaft Position Sensor Circuit >> Monitored & Set Conditions

Monitored & Set Conditions

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Circuit is monitored when engine is cranking or running with battery voltage greater than 10 volts. DTC will set if at least 5 seconds or 2.5 engine revolutions have past with Crankshaft Position (CKP) sensor signals present but no signals from Camshaft Position (CMP) sensor.

scientia non olet · About LEMON Manuals