LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Self Diagnostics - 4.7L) >> Diagnostic Tests >> DTC P0335: Crankshaft Position Sensor Circuit >> Monitored & Set Conditions

Monitored & Set Conditions

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Circuit is monitored when engine is cranking. DTC will set if no CKP signal is present during engine cranking, and at least 8 camshaft position sensor signals have occurred.

scientia non olet · About LEMON Manuals