Monitored & Set Conditions
WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
Manifold Absolute Pressure (MAP) sensor circuit is monitored with ignition on, no Camshaft Position (CMP) sensor or Crankshaft Position (CKP) sensor signal within 75 milliseconds and engine speed less than 250 RPM. DTC will set if PCM senses MAP sensor voltage is less than 2.2 volts, but greater than 0.04 volt for 300 milliseconds. This is a one trip fault.