LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Controls - Removal, Overhaul & Installation) >> Sensors & Switches >> Throttle Position Sensor >> Removal (4.7L)

Removal (4.7L)

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

The Throttle Position (TP) sensor is located on the throttle body. Remove air duct and air resonator box at throttle body. Disconnect TP sensor electrical connector. See Figure. Remove 2 TP sensor mounting bolts (screws). See Figure. Remove TP sensor from throttle body.