LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Controls - Removal, Overhaul & Installation) >> Sensors & Switches >> Camshaft Position Sensor >> Installation (3.9L & 5.9L)

Installation (3.9L & 5.9L)

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install camshaft position sensor to distributor. Align sensor into notch on distributor housing. Connect wiring harness. Install rotor.
  2. Install distributor cap. Tighten mounting screws. Install air cleaner assembly.
scientia non olet · About LEMON Manuals