LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Controls - Removal, Overhaul & Installation) >> Fuel Systems >> Fuel Pump Inlet Strainer >> Installation

Fuel Pump Inlet Strainer: Installation

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Snap new filter to bottom of module. Be sure "O" ring is in correct position.
  2. Install fuel pump module. See FUEL PUMP MODULE . Install fuel tank. See FUEL TANK .