LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Controls - Removal, Overhaul & Installation) >> Air Induction Systems >> Throttle Body >> Removal (4.7L)

Removal (4.7L)

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air duct and air resonator box at throttle body. Disconnect throttle body electrical connectors at IAC motor and Throttle Position (TP) sensor. See Figure.
  2. Remove vacuum line at throttle body. Remove all control cables from throttle body (lever) arm.
  3. Remove three throttle body mounting bolts. Remove throttle body from intake manifold.
scientia non olet · About LEMON Manuals