Ignition Switch

WARNING: This page is about a different car, the 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

The electrical ignition switch is located on the steering column. It is used as the main on/off switching device for most electrical components. The mechanical key cylinder is used to engage/disengage the electrical ignition switch.

Vehicles equipped with an automatic transmission and a steering column mounted shifter: an interlock device is located on the shift cable. This interlock device is used to lock the transmission shifter in the Park position when the key cylinder is in any position and the brake pedal is not depressed.

Vehicles equipped with a manual transmission and a floor mounted shifter: on certain models, a lever is located on the steering column behind the ignition key cylinder. The lever must be manually operated to allow rotation of the ignition key cylinder to any position. If it is difficult to rotate the key to any position, the lever mechanism may be defective. This mechanism is not serviceable. If repair is necessary, the steering column assembly must be replaced.