LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (4.7L Engine (Service Information)) >> Oil Pump >> Assembly

Oil Pump: Assembly

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Wash all parts in a suitable solvent and inspect carefully for damage or wear.
  2. Install inner and outer rotors
  3. Install oil pump cover plate and install cover bolts and tighten them to 12 N.m (105 in. lbs.).
  4. Prime oil pump before installation by filling rotor cavity with engine oil.
  5. If oil pressure is low and pump is within specifications, inspect for worn engine bearings or other causes for oil pressure loss.
scientia non olet · About LEMON Manuals