Identification Of System
WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
The EBC 125 is a one channel, one HCU, to control hydraulic pressure to both REAR brakes during antilock braking, and one rear wheel speed sensor. A CAB mounted on top of the HCU controls the solenoids/valves.
The EBC 325 is a three channel, one HCU to control the FRONT and REAR brakes, two front wheel speed sensors, and one rear wheel speed sensor. The CAB mounted on the top of the HCU controls the solenoids/values.