Required Tools And Equipment
WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
DRBIII® (diagnostic read-out box) scan tool - must use the latest release level.
Diagnostic Pinout Box #8815
Electronic Transmission Adapter Kit (Miller #8333-1A)
Evaporative Emissions Leak Detector #8404
Terminal Removal tool #3638
Fuel filler adapter #8382
Fuel pressure adapter (C-6631) or #6539
Fuel pressure kit (C-4799-B) or #5069
Fuel pressure kit #8978
Fuel release hose (C-4799-1)
Jumper wires
Line pressure adapter (Miller #8259)
Ohmmeter
Oscilloscope
Pressure gauge 0-2068 kPa (0-300 PSI)
Transmission simulator #8833
Vacuum gauge
Voltmeter
12 volt test light minimum 25 ohms resistance with probe #6801
Fuel pressure gauge #6828 - Diesel
Fuel test fitting #9013 - Diesel
Fuel test fitting #9014 - Diesel
Air induction test tool
CAUTION:
A 12 volt test light should not be used for the following circuits, damage to the Powertrain Controller will occur.
- 5 Volt Supply
- J1850 PCI Bus
- CCD Bus
- PCI Bus
- CKP Sensor Signal
- CMP Sensor Signal
- Vehicle Speed Sensor Signal
- O2 Sensor Signal