Identification Of System
WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
The Powertrain Control Module (PCM) monitors and controls:
- fuel system
- ignition system
- charging system
- speed control system
- The NGC module is used on all trucks.
- The 45RFE/545RFE Transmission family can be identified by confirming the presence of a 23 pin electrical connector on the left hand side of the transmission oriented vertically near the manual lever.
- The 42RLE transmission can be identified by confirming the presence of a Solenoid/Pressure Switch Assembly located on the passenger side of the transmission. The Transmission Range Sensor, Input Speed Sensor and Output Speed Sensor are located on the drivers side of the transmission. Refer to the IDENTIFICATION OF SYSTEM for transmission ID tag descriptions.
- The Electronic Transfer Case can be identified by the Transfer Case Identification Tag, confirming the presence of a Shift Motor or the Selector Switch on the dash panel.