LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Powertrain Diagnostic Procedures) >> Diagnostic Information And Procedures >> Transfer Case - Electronic - Symptoms >> Symptom: TRANSFER CASE SELECTOR SWITCH ERROR >> When Monitored and Set Condition:

When Monitored and Set Condition:

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

When Monitored: Continuously with the ignition on.

Set Condition: This DTC is set whenever Transfer Case Control Module (TCCM) detects a Selector Switch input of less than 250 ohms, or more than 14.5 k/ohms. This DTC will also set whenever TCCM detects a Selector Switch input of.25 volts or less, or 5.0 volts or more.

scientia non olet · About LEMON Manuals