LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Powertrain Diagnostic Procedures) >> Diagnostic Information And Procedures >> DRIVEABILITY - NGC - Diagnostic Tests >> P0344-Camshaft Position Sensor Intermittent >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. GOOD TRIP EQUAL TO ZERO
  2. CMP WIRE HARNESS INSPECTION
  3. (K6) 5-VOLT SUPPLY CIRCUIT OPEN OR SHORTED TO GROUND
  4. TONE WHEEL/PULSE RING INSPECTION
  5. CHECKING CKP SENSOR SIGNAL WITH THE DRBIII® LAB SCOPE
  6. CAMSHAFT POSITION SENSOR
  7. (K44) CMP SIGNAL CIRCUIT SHORTED TO BATTERY VOLTAGE
  8. (K44) CMP SIGNAL CIRCUIT OPEN
  9. (K44) CMP SIGNAL CIRCUIT SHORTED TO GROUND
  10. (K44) CMP SIGNAL CIRCUIT SHORTED TO THE (K6) 5-VOLT SUPPLY CIRCUIT
  11. PCM