Rear Power Outlet: Installation
WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Install the cigar lighter or power outlet mount into the instrument panel lower bezel.
- Align the splines on the outside of the cigar lighter or power outlet receptacle base connector receptacle with the grooves on the inside of the mount.
- Press firmly on the cigar lighter or power outlet receptacle base until the retaining bosses of the mount are fully engaged in their receptacles.
- Install the cigar lighter knob and element into the cigar lighter receptacle base, or the protective cap into the, power outlet receptacle base.
- Install the lower bezel onto the instrument panel.
- Reconnect the battery-negative cable.