Installation - 4.7L
WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Clean throttle body-to-intake manifold o-ring.
- Clean mating surfaces of throttle body and intake manifold.
- Install throttle body to intake manifold by positioning throttle body to manifold alignment pins.
- Install three mounting bolts. Tighten bolts to 12 N.m (105 in. lbs.) torque.
- Install control cables.
- Install vacuum line to throttle body.
- Install electrical connectors.
- Install air duct/air box at throttle body.