LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Fuel Injection) >> Intake Air Temperature Sensor >> Installation >> Installation - 3.7L

Installation - 3.7L

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check condition of sensor o-ring.
  2. Clean sensor mounting hole in intake manifold.
  3. Position sensor into intake manifold and rotate clockwise until past release tab.
  4. Install electrical connector.
scientia non olet · About LEMON Manuals