LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Fuel Injection) >> Fuel Pump Relay >> Removal

Fuel Pump Relay: Removal

WARNING: This page is about a different car, the 2004 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

The fuel pump relay is located in the Power Distribution Center (PDC) ( Fig 1 ). Refer to label on PDC cover for relay location.

Fig 1: Identifying Power Distribution Center
G03488964Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove PDC cover.
  2. Remove relay from PDC.
  3. Check condition of relay terminals and PDC connector terminals for damage or corrosion. Repair if necessary before installing relay.
  4. Check for pin height (pin height should be the same for all terminals within the PDC connector). Repair if necessary before installing relay.