LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Disc Brakes & Drum Brakes >> Removal & Installation >> Power Brake Booster >> Removal

Power Brake Booster: Removal

  1. Remove master cylinder and reservoir. See MASTER CYLINDER .
  2. Disconnect vacuum lines at booster.
  3. Remove clip securing booster push rod to brake pedal. See Fig 1.
  4. Remove nuts from booster mounting studs. See Fig 2.
  5. Remove booster, spacer, and gaskets from front cowl panel.
Fig 1: Removing & Installing Power Brake Booster (1 Of 2)
G00264452Courtesy of CHRYSLER CORP.
Fig 2: Removing & Installing Power Brake Booster (2 Of 2)
G00264453Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals