LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, RWD >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Disc Brakes & Drum Brakes >> Removal & Installation >> Parking Brake Pedal Assembly >> Removal

Parking Brake Pedal Assembly: Removal

  1. Remove left side kick panel.
  2. Remove brake release rod from pedal assembly. See Fig 1.
  3. Disconnect brake warning lamp switch.
  4. Remove front parking brake cable. See PARKING BRAKE CABLES (FRONT) .
  5. Remove mounting nuts and mounting bolt.
  6. Slide assembly rearward off the mounting studs. See Fig 1.
Fig 1: Removing & Installing Parking Brake Assembly
G00264473Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals